PRODUCTS                                                                                                     Download Product catalog
Internal Rotary Gear Pump
Get exact Receipt of oil/liquid fom truck tanker to storage tank & transfer exact required quantity from storage tank to single or multiple point.
Size:
Inlet = 2" Hose & Outlet = 2" Hose
Accuracy:
± 0.1%
Capacity:
150 LPM (Diesel)
Electrical:
2 HP Motor (Flame proof encloser)
Also available in size 1" x 1" BSP capacity 90LPM

“EAST-MAN” Internal Rotary Gear Pumps are the most advance positive displacement and self priming Pumps, designed for large suction capacity as well as high pressurized discharge capacity. Especially suited for handling of highly inflammable Fuel Oils, Solvents, Lube Oils, Hydraulic Oil, Mineral Oils, Synthetic Oils, Vegetable Oils, Animal Oils and other non corrosive Oils/Liquids.

“EAST-MAN” Internal Rotary Gear Pumps are well protected as they have inbuilt By-Pass Valve, Check Valve, Pressure Relief Valve, Strainer, Air Separator and provision of duel outlet which also make it very Cost effective.

Advance manufacturing techniques, dimensional accuracy, rigid C. I. Body, low noise high discharge capacity and foremost indigenously built, make “EAST-MAN” Internal Rotary Gear Pump exceptionally reliable.

Ref. No.
FEATURES
FUNCTIONS
1
INLET 2” BSP female thread for suction line
2
OUTLET 1” BSP female thread for discharge line
3
AUX. OUTLET BSP female thread plugged, provision for duel outlet.
4
BY-PASS VALVE With screw adjustment to avoid direct load on motor if discharge line throttled.
5
CHECK VALVE Keep suction line full to make suction easy.
6
PRESSURE RELEIF VALVE Prevent back pressure from discharge line
7
STRAINER Prevent dirt, grit, pipe scale & foreign matter into the pump, hence increase the pump life
8
LIP SEAL Prevent bleeding from the drive shaft
9
P. B. BUSHES Drive shaft runs on the two P. B. bushes, hence well support the rotor and shaft
11
AIR SEPERATOR CHAMBER Add air separator assembly on extra charges if needed to eliminate air into discharge line.
12
AIR VENT Air release from here if air separator assembly fitted, otherwise plugged.
13
MOUNTING LEGS Four mounting legs with 5/16” thread to balanced for easy and well supported mounting.

© Copyright 2000-02, Eastern Automotive Machine Tools Pvt. Ltd. All rights reserved.